How to identify the quality of the polishing wax?

　1) on the wheel effect; Have a crush on whether round off powder. It can identify the polishing wax oil viscosity, and the overall density of fine.

　　2) standard tossed back and forth on a four. See surface oil residue after throw, whether can identify oil powder mixture ratio imbalance.

　　3) after throwing a light effect, can determine the size of the cutting force of polishing wax powder. Can determine the efficiency of the high and low.

　　4) white light or inferior smooth, after polishing can be identified as having a high temperature polymer, which has serious residues. Or scratches.

　　5) broken section to see if there is loose phenomenon and the tiny air bubbles, can determine whether a mixed mixing dispersed evenly.

　　6) surface has serious scratches, failed to processing procedure, scratches, and the lack of cutting force itself.

　　7) after the polishing cloth round behind, whether has the induration phenomenon? Scleroma occur which means polishing wax oil content is too high. Must be clear to the next working procedure, or the next work. Namely, to speed up to shorten the service life of the polishing cloth round.

　　8) surface refracted light evenly, whether can determine whether the wheel even caused by partial grinding.

　　9) standard of high quality polishing wax should possess the following conditions; Are angled on wheel effect is good, the contact melting, filiform, should not be, Cast surface is very clean, or have a light mist shape, and will disappear naturally. Surface refraction light even, not have Nick, press with finger light with a thin layer of anti-rust oil adhesion, extend the protection limitation of artifacts.

　　10) wax body surface is smooth, hand touch feeling smooth feeling, no greasy feeling for the high quality of polishing wax.